Full-Service Roofing | New Port Richey, FL
New Port Richey Roofing & Maintenance offers a complete range of roofing services in New Port Richey and Howey In The Hills, Lamont, Middleburg, Orlando, Quincy. Every job gets the same attention. Big or small.
Roof Replacement
After tear-off, we always check decking and replace what's needed. Soft spots mean moisture intrusion. The old roof was leaking longer than you realized. We use 7/16" or 15/32" CDX plywood depending on rafter spacing. New decking costs $75-$120 per sheet installed. We only replace what's actually damaged.
Get a Free Quote →
Roof Repair
We repair asphalt shingle, metal, flat membrane, and tile roofs. Our trucks carry common repair materials so most fixes happen same-visit. Shingle repairs, flashing replacement, pipe boot swaps, ridge cap fixes, valley re-flashing. All routine for our New Port Richey crews.
Get a Free Quote →
Storm Damage Repair
Wind speeds above 60 mph cause shingle tab lift and adhesive seal failure per ASTM D7158 testing protocols. Our New Port Richey inspectors check the entire windward exposure. Not just the obvious damage. Poor ventilation causes ice dams which cause water intrusion under the shingle field during freeze-thaw cycles. We document all contributing factors so your insurance claim covers root-cause repairs, not just surface patches.
Get a Free Quote →
New Roof Installation
We handle new construction from permits through final inspection. Our New Port Richey office coordinates with your builder on scheduling, material delivery, and inspection timing. Typical install time is 1-3 days depending on size and complexity.
Get a Free Quote →
Metal Roofing
Metal roof repairs are usually sealant failures at transitions, loose panels from improper installation, or rust spots on older galvanized systems. Our New Port Richey crew repairs all metal types. Not every issue needs a full replacement. Sometimes a sealant touch-up or panel re-securing solves it.
Get a Free Quote →
Shingle Roofing
GAF Timberline HDZ. The best-selling shingle in North America. With StrikeZone nailing area for consistent fastener placement. Class A fire rating per UL 790, Class 4 impact resistance per UL 2218 (when installed in the GAF Roof System), and Class H wind rating per ASTM D7158 (130 mph). We install Timberline in the full GAF system to qualify for Golden Pledge warranty: 25-year non-prorated workmanship plus 50-year materials with WindProven limited wind warranty (no max speed). That warranty is why we recommend GAF for most New Port Richey homes.
Get a Free Quote →
Flat Roofing
TPO single-ply membrane is our most-installed flat roof system in New Port Richey. White reflective surface reduces cooling costs, hot-air welded seams are watertight, and 15-20 year manufacturer warranties are standard. Available in 45-mil, 60-mil, and 80-mil thickness.
Get a Free Quote →
Commercial Roofing
We install Carlisle SynTec and Firestone TPO membrane systems in 60-mil and 80-mil thickness over minimum R-25 polyiso insulation (more in climate zones requiring it). Seams hot-air welded at 900°F+ and tested with a seam probe. Fully adhered systems for wind uplift zones per FM I-90 or I-120. Mechanically attached for re-roofs over existing insulation. NRCA member, trained per manufacturer specifications.
Get a Free Quote →
Gutter Installation
Gutter sizing matters more than most homeowners realize. We calculate the effective roof area, local rainfall intensity, and the number of downspout outlets needed to handle peak flow. Undersized gutters overflow. Undersized downspouts back up. We size everything to handle New Port Richey's worst rain.
Get a Free Quote →
Roof Inspection
Commercial and flat roof inspections include infrared moisture scanning with Flir E8 thermal cameras. Trapped moisture in the insulation layer shows as temperature differentials on the thermal image. No need to cut core samples everywhere. We identify wet zones, then core sample the suspect areas to confirm. This approach gives you a precise repair scope at a fraction of the cost of exploratory tear-offs.
Get a Free Quote →
Emergency Roof Repair
After we secure the tarp and stop the leak, we photograph and document everything while the damage is fresh. This documentation is critical for insurance claims. Adjusters want to see the damage before any repairs are made.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →